1. Product overview

Product name：Torque Terminals（BLMT series）

Model representation method

BLMT-□□/□□-□□

BLMT-diameter of mounting recess/suitable conductor range-product model

2. Application

Torsion terminals are connectors used for connecting wires to equipment, mainly used for connecting insulated wires, aluminum wires, aluminum alloy wires, steel-core aluminum wires and copper wires at non-bearing positions.

3. Scope of application

 Applicable leading line：25-240㎜².

4.Technical parameters

①The body of the product is made of high strength tin-plated aluminum alloy

②The inner surface of the wire hole has a threaded groove design

③Torque bolts adopt double shear head design to ensure that the bolt can not be removed after cutting head, the bottom of the bolt has a contact ring, better guarantee the electrical properties of the product.

④With a special pad, take it out or put it in, and adjust the product’s range of applicable wires, three products will ensure that all wires from 25㎜²-240㎜² are applicable

5. Installation steps

①Check the type and diameter of the wire and select the appropriate type of torque terminal to determine whether the pad wire is used.

②.To measure the length of the end conductor inner hole, to determine the length of wire peel (length of the conductor inner hole L-wire peel length L2≤2 mm).

③Insert the wire into the terminal and install the torque bolt.

④Apply force with socket wrench until torque bolt head is cut.

⑤Use suitable bolts to secure the torque terminals to the equipment.