Cable accessories with shear-head bolts

Cable accessories with shear-head bolts

Short Description:


Product Detail

Product Tags

1. Product overview

Product name:Torque Terminals(BLMT series)

Model representation method

BLMT-□□/□□-□□

BLMT-diameter of mounting recess/suitable conductor range-product model

2. Application

Torsion terminals are connectors used for connecting wires to equipment, mainly used for connecting insulated wires, aluminum wires, aluminum alloy wires, steel-core aluminum wires and copper wires at non-bearing positions.

3. Scope of application

 Applicable leading line:25-240㎜².

4.Technical parameters

①The body of the product is made of high strength tin-plated aluminum alloy

②The inner surface of the wire hole has a threaded groove design

③Torque bolts adopt double shear head design to ensure that the bolt can not be removed after cutting head, the bottom of the bolt has a contact ring, better guarantee the electrical properties of the product.

④With a special pad, take it out or put it in, and adjust the product’s range of applicable wires, three products will ensure that all wires from 25㎜²-240㎜² are applicable

5. Installation steps

①Check the type and diameter of the wire and select the appropriate type of torque terminal to determine whether the pad wire is used.

ddd kkkk

Catalog No.

Suitable Conductor

Position and diameter of mounting hole

Outer diameter

Inner Diameter

Length of mat sheet

Bolt No.

Specification of bolt head

note

LB

L

D

d

L1

AF

BLMT-25/95-13

25-95

13

60

24

12.8

30

1

13

Figure ⑴

BLMT-35/150-13

35-150

13

86

28

15.8

36

1

17

Figure ⑴

BLMT-95/240-13

95-240

13

112

33

20.2

61

2

19

Figure ⑵

②.To measure the length of the end conductor inner hole, to determine the length of wire peel (length of the conductor inner hole L-wire peel length L2≤2 mm).

vd

③Insert the wire into the terminal and install the torque bolt.

④Apply force with socket wrench until torque bolt head is cut.

tyj

⑤Use suitable bolts to secure the torque terminals to the equipment.


  • Previous:
  • Next:

  • Write your message here and send it to us